Energy · Combined Cycle

Uzbekistan Combined-Cycle Power Plant

Terminal Yapı develops this natural-gas combined-cycle power plant as the investor, with REEX EPC GmbH, a German turn-key power-plant specialist, as the EPC contractor.

Fergana, UzbekistanLocationOngoingStatusNatural gasFuel
Overview

A turn-key power plant, built in partnership

Terminal Yapı is developing a natural-gas combined-cycle power plant in Uzbekistan as the investor. Engineering, procurement and construction are delivered by REEX EPC GmbH of Hamburg as the EPC contractor, a specialist that has designed, built and commissioned turn-key power plants across the world for decades.

Together the partnership covers a broad capacity range, from around 30 MW up to 800 MW, while its combined-cycle references reach as high as 1,300 MW.

How a combined-cycle plant works

A combined-cycle plant draws power twice from the same natural gas: first from a gas turbine, then from the steam its exhaust creates.

  1. Gas turbine. Natural gas is burned to spin a gas turbine and its generator, producing the first block of electricity.
  2. Heat-recovery boiler (HRSG). The turbine's hot exhaust, which would otherwise be wasted, is captured to raise high-pressure steam.
  3. Steam turbine. That steam drives a second, steam-turbine stage, producing additional power from the same fuel and raising overall efficiency to around 55-60%.

EPC scope

  • Engineering: Complete plant design plus mechanical, electrical and I&C systems.
  • Procurement: Sourcing of turbines and systems in close coordination with OEMs.
  • Construction and erection: Civil works, mechanical and electrical erection on site.
  • Commissioning: Testing, commissioning and hand-over to reliable commercial operation.

EPC contractor: REEX EPC GmbH

Founded in 1998 and based in Hamburg, Germany, REEX EPC GmbH is an independent contractor specialised in power and petrochemical projects. Its team brings more than 40 years of industry experience, including former BBC, ABB and Alstom engineers, in building gas-turbine power stations and engineering electrical and I&C systems.

From maintenance, repair and refurbishment to full turn-key delivery, REEX has served power-plant owners worldwide. As the EPC contractor, REEX brings this experience to the project.

Our EPC contractor's reference plants

A selection of gas and combined-cycle power plants delivered or under development by REEX EPC GmbH and partners.

Commissioned

OutputLocationEquipmentScope
792 MWMiddle East4 × GE 7FAGas turbines
750 MWBarranquilla, ColombiaCombined-cycle plantSteam-turbine works
600 MWSaudi ArabiaCombined-cycle station, 4 × GE 7FAEngineering and commissioning
235 MWLibya5 × Siemens SGT-800Natural gas / LFO
63 MWDjibouti6 × Wärtsilä 40/45Power plant

Under development

OutputLocationEquipmentFuel
1,300 MWEgyptCombined-cycle conversion programNatural gas
265 MWIran26 × Wärtsilä 34SGNatural gas
150 MWAfghanistan3 × GE LM6000Natural gas
30 MWAfghanistanGT10AGas turbine

Figures and references belong to REEX EPC GmbH and partners and reflect the partnership's combined experience; they are shown to illustrate proven capability.

Your Reliable Partner

Ready to undertake your most important project, anywhere in the world.